Table of Contents
Advertisement
Confirmation method
●On returning home, the following actions can be performed in conjunction with unlocking the
Main Entrance (E.lock) using the ID collating unit.
Whether there is any delivery
●
Check whether there is any message from the Manager Room
●
Notifying your home that you are back
●
●If the ID collating unit does not support linking to the HA system of the apartment building, this
Note
function cannot be used. In some cases, however, the ID collating unit is installed separately from the
lobby phone. If you do not know what equipment is installed, contact the administrating company, the
manager room or the company that installed the system.
●The lock status of the Unit Entrance can be displayed only if an E.lock or a switch strike lock is
installed in the unit.
1
Perform ID authentication using the
ID collating unit
1
Wave the non-contact type IC card over the contactless key
reader (ID collating unit)
Disarming the security alarm
After pressing
1
pass your contactless card over the contactless card reader
(ID collating unit) to disarm the security alarm in your unit.
●If your security alarm could not be disarmed, a message of
Note
"Security Alarm could not be disarmed" will appear.
●If you do pass your contactless card over the contactless card
reader within 3 seconds, the security alarm will not be disarmed.
2
The main entrance (E.lock) is unlocked if ID
authentication is successfully performed
●If the link function is turned OFF or no event has occurred, the
message "Unlock" appears on the screen with a notification sound.
3
Confirming Deliveries, Messages and the Alarm Occurrence Status
Various linked operations are performed
●The following items are displayed on the LCD.
Whether there is any delivery
●
Whether there is any message
●
4
Return home notification
Sending notification that you are back
●Automatically sent to the base unit after unlocking the main
entrance (E.lock).
●A notification sound (beep) is generated by the base unit
and a still image shot with the lobby phone when unlocking
is displayed on the screen of the base unit.
●If the
button (Clear button) is pressed within
消
3 seconds after unlocking the main entrance (E.lock), the
return home notification is not sent.
3
: Check using ID authentication (on returning home)
Disarming of unit security alarm
●
, you have approximately 3 seconds to
Alarm occurrence status
●
Lobby Phone
Alarm occurrence status
●
電源
1
2
3
4
5
6
7
8
9
ID collating
0
消
呼出
unit
Non-contact type
IC card
1
●A voice message is played.
3
121
Advertisement
Table of Contents
