Security Setting - Panasonic 1M Operation Manuals

This is for setting up the security function.
For the Security Alarm, see also (
1
Touch
Screen
The Security Settings Screen is displayed.
For how to start the settings, please see
page 50.
2
On the Security Setting Screen, touch
for the content
you wish to set
For details on each
setting, please see
below.
Security Number Setting
Note
●Be sure to take a note of the Security Number in the "Note of Security Number" on P48 as a reminder in
case you forget it.
●This cannot be set if there is no security function.
●The Security Number cannot be set or changed when the Security Alarm is in the set state.
Please disarm the Security Alarm before attempting to set or change the Security Number.
●The Security Number is set by selecting four digits between 0 and 9.
3
Select one of "Yes/Yes (Only when an
alarm aounds)/No", and touch
The Security Number must be entered
Yes
when the Security Alarm is disarmed.
The Security Number is only required
Yes (Only when
for the Security Alarm.
an alarm aounds.)
No
It is not necessary to enter the
factory default
Security Number for the
setting
Security or Security Alarm.
After touching
Number using the following procedure.
On the Security Number Setting Screen,
1
touch
(Only when an alarm sounds)"
Setting according to your preferences

Security Setting

pages 97 to 105).
on the Setting
Security setting screen
, set the Security
for either of "Yes/Yes
Continued on next page
Setup screen
Touch
Touch
any one
Touch to go to 2/2
Security Number Screen
1
Touch
any one
1
Touch to go to 1/2
Touch
any one
2
Touch
Touch
61