Panasonic 1M Operation Manuals page 77

When fire occurs on the same floor
or the floor directly below
If fire occurs on the same floor or the flow
directly below, the base unit reports the fire.
(neighborhood fire alarm)
(alarm sound) Warning, fire, fire. A
fire has broken out in an
neighbouring area. Please evacuate
the premises in a safe manner.
Fire indication
Flashing in red
電源r
火災 Gas Not Home
FIRE GAS NOTHOME
POWER
Fire lamp
flashing
in red
The fire indication will turn off after
approximately 3 minute and the periphery of
the MENU button will flash in red.
If recovery process is conducted in the
Manager Room with the residential receiver,
the alarm message stops automatically and
the periphery of the MENU button, fire lamp
and the door phone handset warning lamp
will turn off.
The periphery of the MENU button and
Note ●
fire lamp will keep flashing until
restoration process is complete in the
manger room.
It is also possible to turn off the fire
●
indication within 3 minutes. (
How to stop the alarm message
Press the Alarm Stop button.
Stop the alarm message after confirming
Note
that no fire is occurring in your
neighborhood.
Measures taken when alarm is sounding
Fire has occurred in the vicinity of this
place. Check the safety condition and
immediately evacuate.
Alarm Stop button
非常
EMERG.
復旧/警報音停止
RESET/STOP ALARM
MENU button
火災
確認
FIRE CONFIRM
メニュー
MENU
終了
OFF
Alarm Lock OPEN
SET
解錠
UNLOCK
通話
TALK
Page 75)
When VGDB item numbers are used
When the detector detects fire, the base unit and
the cordless handset of the door phone
report the fire.
Warning, fire, fire. A fire has
broken out. Please evacuate
the premises in a safe manner.
Fire indication
Flashing in red
電源
火災 FIRE Gas GAS Not Home NOTHOME
POWER
Fire lamp
flashing
in red
The fire indication will turn off after
approximately 3 minute and the periphery of
the MENU button will flash in red.
If the detector is restored, the alarm message
automatically stops and the periphery of the
MENU button, fire lamp and the alarm
indicator lamp on the handset of the door
phone will turn off.
The periphery of the MENU button, fire lamp
Note ●
and alarm indicator lamp will keep flashing
until the detector is restored.
It is also possible to turn off the fire
●
indication within 3 minutes. (
How to stop the alarm message
Press the Alarm Stop button.
Measures taken when alarm is sounding
Immediately go to the fire origin and check
out the status, and then perform initial fire
extinction, report to the authority, evacuation
and so on accordingly.
Cautions
●
Using gas/kerosene stove right under the
heat detector may cause an erroneous
report.
● A large amount of smoke/steam created by
cooking fish/meat may cause the smoke
detector to make an erroneous report.
Alarm Stop
非常
button
EMERG.
警報音停止
STOP ALARM
MENU button
メニュー
MENU
終了
OFF
Alarm SET Lock OPEN
解錠
UNLOCK Handset of the door phone
Alarm indicator lamp
通話
Flashing in red
TALK
Alarm sounding
Page 75)
77