When Making An Emergency Call Alarm - Panasonic 1M Operation Manuals

When Making an Emergency Call Alarm

Note
Use the system after confirming that each device is properly installed.
Set Call to the emergency call alarm. It can also be set to the
Installer
Setting toilet/bathroom announcement.
(Consult with the company that installed the system or the administrating company.)
When the Call button is pressed, the base unit and
the handset of the door phone report the event.
If the Call button is restored, the alarm message
stops, and the periphery of the MENU button and
the alarm indicator lamp on the handset of the
door phone will turn off.
●If the button is restored within 20 seconds
Note
after pressing the button, the Call 1
indication flashes for approximately 20
seconds, and then turns off.
●It is also possible to turn off the Call 1
indication within 3 minute. (
●Up to 4 Call buttons can be connected.
The screen is displayed according to the
installation setting.
How to stop the alarm message
Press the Alarm Stop button.
It is also possible to stop the alarm sound
from the manager room.
Measures taken when alarm is sounding
Check the details on the alarm and take
necessary measures.
Installer
Setting
●You can also change the screen displayed
during emergency calls.
●It is possible to announce the location of
the caller.
●Optionally the alarm can continue to sound
after the pressed Call button returned to the
original status. (self-retention function)
●It is also possible to report to the manager
room and handset of the door phone.
●It is possible to disable the alarm message
playback on the handset of the door phone.
Consult with the company y that installed the
system or the administrating company.
When the Call Button Is Pressed
Page 75)
Call button
(pee-paw, pee-paw, pee-paw)
Please come immediately.
電源
Gas GAS Not Home NOTHOME Alarm
POWER
(pee-paw, pee-paw, pee-paw)
Please come immediately.
The Call 3 indication will turn off after
approximately 3 minutes and the periphery of
the MENU button will flash in red.
Press
Alarm Stop
非常
EMERG.
button
復旧/警報音停止
RESET/STOP ALARM
Call 1 indicator
火災
flashes in red
確認
FIRE CONFIRM
メニュー
MENU
MENU button
終了
OFF
SET Lock OPEN
解錠
UNLOCK
通話
TALK
After about 30 seconds
Cordless handset
of the door phone
with a camera
Alarm indicator
flashes in red
81