Function Diagrams And Parameters - Siemens Sinamics S120 Function Manual

Communication
10.3 Communication via PROFINET IO
● Lower energy costs
● Reduction of thermal emissions
● Longer service life by reducing the effective operating times
PROFIenergy properties of the SINAMICS S120 drive system
SINAMICS S120 drive system devices meet the following requirements:
● SINAMICS S120 devices are certified for PROFIenergy
● SINAMICS S120 devices support PROFIenergy Class Type 3
PROFIenergy command
Parameter number
r5600
p5601
p5602[0...1]
r5603[0...1]
r5604[0...1]
r5605[0...1]
p5606[0...1]
p5607
r5608
r5609
r5610
p5611
p5612[0...1]
r5613
Parameters r5600 to r5610 are standard PROFIenergy parameters.
Parameters from p5611 are manufacturer-specific PROFIenergy parameters.
10.3.9.1

Function diagrams and parameters

Function diagrams (see SINAMICS S120/S150 List Manual)
● 2610 Execution control
Overview of important parameters (see SINAMICS S120/S150 List Manual)
● r5600 PE_Mode_ID
● p5602[0...1] PE minimum energy-saving mode idle time
● p5606[0...1] PE maximum energy-saving mode dwell time
● p5611 PE energy saving generally enable/disable
666
PROFIenergy command
PE_Mode_ID
PE_Mode_Attributes
Time_min_Pause
Time_to_Pause
Time_to_operate
Time_min_length_of_stay
Time_max_length_of_stay
Mode_Power_Consumption
Energy_Consumption_to_Pause
Energy_Consumption_to_Operate
Energy_Consumption_to_Destination
Generally enable/inhibit energy saving
Enable/inhibit device energy saving
BO: Energy saving active/inactive
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Drive functions