Siemens SINAMICS S120 Function Manual page 391

Type C standards/product standards
C standards are product-specific standards (e.g. for machine tools, woodworking machines,
elevators, packaging machines, printing machines etc.). Product standards cover machine-
specific requirements. The requirements can, under certain circumstances, deviate from the
basic and group standards. Type C/product standards have the highest priority for machine
manufacturers who can assume that it fulfills the basic requirements of Annex I of the
Machinery Directive (automatic presumption of compliance). If no product standard has been
defined for a particular machine, type B standards can be applied when the machine is
constructed.
A complete list of the standards specified and the mandated draft standards are available on
the Internet at the following address:
Standards (http://www.newapproach.org/)
Recommendation: Due to the rapid pace of technical development and the associated
changes in machine concepts, the standards (and C standards in particular) should be
checked to ensure that they are up to date. Please note that the application of a particular
standard may not be mandatory provided that all the safety requirements of the applicable
EU directives are fulfilled.
Safety Integrated
Function Manual, 12/2018, 6SL3097-5AR00-0BP1
Standards and regulations
10.2 Safety of machinery in Europe
389