Overview Of Safety Integrated Functions; Safety Integrated Basic Functions - Siemens SINAMICS S120 Function Manual

Overview of Safety Integrated functions

3.1

Safety Integrated Basic Functions

Note
Basic Functions do not require an encoder
The Safety Integrated Basic Functions are functions for safely stopping the drive. You do not
require an encoder.
Note
Application of the Basic Functions
Basic Functions are available in all control modes with and without encoder for synchronous
and induction motors without any restrictions.
Note
Control via TM54F
If you want to control the Safety Integrated Basic Functions via TM54F, set p9601.6 = 1.
This chapter should provide first users with a quick overview of the principle mode of
operation of safety functions.
The entry into the description of the safety functions is based on the definition according to
standard EN 61800-5-2 and some simple examples for using the function.
The description of the functions is simplified, as far as possible to clearly shown essential
properties and setting options.
You will find more information on the functions in the following chapters,
e.g. "Safety Integrated basic functions (Page 70)".
Safety Integrated
Function Manual, 12/2018, 6SL3097-5AR00-0BP1
3
39