Commissioning: Basic Procedure; Making Basic Settings; Starting The Safety Commissioning; Making Basic Safety Settings - Siemens SINAMICS S120 Function Manual

Commissioning

6.8 Commissioning: Basic procedure

6.8 Commissioning: Basic procedure
6.8.1

Making basic settings

6.8.1.1

Starting the safety commissioning

Requirement
For safety reasons, you can only set the safety-relevant parameters of the 1st channel offline
for Startdrive. To set the safety-relevant parameters of the 2nd channel, the drive must be
online. The settings are protected by a password.
Icon
Activating safety settings
1. Click the "Go online" icon.
2. Click the
The dialog for the password input opens.
3. Enter the password.
You only have to enter a new password at the first start to replace the default password.
4. Click "OK" to accept the settings.
The safety commissioning is activated.
6.8.1.2

Making basic safety settings

☐
282
Description
Startdrive is not online.
Startdrive is online. The processing mode is not activated yet.
Startdrive is online. The processing mode is active. In addition to the safety mark-
ing, a "pin"
icon in the toolbar of the parameterization editor.
"Drive axis > Parameter > Safety Integrated > Function selection"
is displayed in the secondary navigation.
Function Manual, 12/2018, 6SL3097-5AR00-0BP1
Safety Integrated