Lenovo RackSwitch G8264 Application Manual page 272

272
G8264 Application Guide for ENOS 8.4
Static ACL flow entries can be deleted using the command:
RS G8264(config­openflow­instance)# static­table remove index <index number>
Static flow table information can be viewed using the following commands:
In OpenFlow version 1.0:
RS G8264(config­openflow­instance)# show openflow table
Openflow instance 1 is currently disabled
Openflow Instance Id: 2
BASIC FLOW TABLE
CONTROLLER ADDED FLOWS
Flow:1
Filter Based, priority: 0, hard­time­out: 0, idle­time­out: 0
cookie: 0x0
QUALIFIERS:
ACTION: drop
STATS: packets=0, bytes=0
Flow:2
Filter Based, priority:65535, hard­time­out: 0, idle­time­out: 0
cookie: 0x0
QUALIFIERS: ether­type:0x88cc
protocol: 0, tos: 0
src­ip:0.0.0.0/32, dst­ip:0.0.0.0/32
src­port: 0, dst­port: 0
ACTION: output:CONTROLLER [Max Len: 65535 / ­ bytes (C/S)]
STATS: packets=0, bytes=0
Flow:3
Filter Based, priority: 2, hard­time­out: 0, idle­time­out: 0
cookie: 0x0
QUALIFIERS:
ACTION: output:CONTROLLER [Max Len: 65535 / ­ bytes (C/S)]
STATS: packets=0, bytes=0