Data Path ID
280
G8264 Application Guide for ENOS 8.4
The data path ID—automatically computed—is a combination of two bytes of the
instance ID and six bytes of the switch MAC address. Alternately, the data path ID
can be manually configured using the following command. Each instance on the
switch must have a unique data path ID:
RS G8264(config)# openflow instance <instance ID>
RS G8264(configopenflowinstance)# dpid <Data path ID>
0x)
Note: If the data path ID is changed, the switch instance closes the active
connection and reconnects with the modified data path ID.
(Hex string starting with