Lenovo RackSwitch G8264 Application Manual page 451

1. Set up Tenant 1 with endpoints on interfaces 5 and 6
2. Set up Tenant 2 with an endpoint on interface 7
3. Set interface 8 as a common uplink for Tenants 1 and 2
4. Set up Tenant 3 with endpoints on interfaces 9 and 10 and uplinks on interfaces 11
and 12
5. Set interface 13 as a link to a service network available to Tenants 1 and 3
© Copyright Lenovo 2016
RS G8264(config)# interface ip 5
RS G8264(config­ip­if)# tenant tenant­id 1
RS G8264(config­ip­if)# interface ip 6
RS G8264(config­ip­if)# tenant tenant­id 1
RS G8264(config­ip­if)# interface ip 7
RS G8264(config­ip­if)# tenant tenant­id 2
RS G8264(config­ip­if)# interface ip 8
RS G8264(config­ip­if)# tenant uplink tenant­id 1,2
RS G8264(config­ip­if)# interface ip 9
RS G8264(config­ip­if)# tenant tenant­id 3
RS G8264(config­ip­if)# interface ip 10
RS G8264(config­ip­if)# tenant tenant­id 3
RS G8264(config­ip­if)# interface ip 11
RS G8264(config­ip­if)# tenant uplink tenant­id 3
RS G8264(config­ip­if)# interface ip 12
RS G8264(config­ip­if)# tenant uplink tenant­id 3
RS G8264(config­ip­if)# interface ip 13
RS G8264(config­ip­if)# tenant services tenant­id 1,3
Chapter 27: Policy-Based Routing
451