Lenovo RackSwitch G8264 Application Manual page 621

5. Configure ports.
6. Turn off Spanning Tree Protocol globally.
Task 2: Configure G8264 2
1. Configure client and server interfaces.
2. Configure the default gateways. Each default gateway points to a Layer 3 router.
© Copyright Lenovo 2016
RS G8264(config)# vlan 10
RS G8264(config­vlan)# exit
RS G8264(config)# interface port 1
RS G8264(config­if)# switchport mode trunk
RS G8264(config­if)# switchport trunk allowed vlan 10
RS G8264(config­if)# exit
RS G8264(config)# vlan 20
RS G8264(config­vlan)# exit
RS G8264(config)# interface port 2
RS G8264(config­if)# switchport mode trunk
RS G8264(config­if)# switchport trunk allowed vlan 20
RS G8264(config­if)# exit
RS G8264(config)# no spanning­tree stp 1
RS G8264(config)# interface ip 1
RS G8264(config­ip­if)# ip address 192.168.1.101 255.255.255.0
RS G8264(config­ip­if)# vlan 10
RS G8264(config­ip­if)# enable
RS G8264(config­ip­if)# exit
RS G8264(config)# interface ip 2
RS G8264(config­ip­if)# ip address 192.168.2.100 255.255.255.0
RS G8264(config­ip­if)# vlan 20
RS G8264(config­ip­if)# enable
RS G8264(config­ip­if)# exit
RS G8264(config)# interface ip 3
RS G8264(config­ip­if)# ip address 10.0.1.101 255.255.255.0
RS G8264(config­ip­if)# enable
RS G8264(config­ip­if)# exit
RS G8264(config)# interface ip 4
RS G8264(config­ip­if)# ip address 10.0.2.100 255.255.255.0
RS G8264(config­ip­if)# enable
RS G8264(config­ip­if)# exit
RS G8264(config)# ip gateway 1 address 192.168.2.1
RS G8264(config)# ip gateway 1 enable
RS G8264(config)# ip gateway 2 address 192.168.1.1
RS G8264(config)# ip gateway 2 enable
Chapter 39: Virtual Router Redundancy Protocol
621