Lenovo RackSwitch G8264 Application Manual page 380

2. Enable PFC for the FCoE traffic.
3. Enable PFC for the business‐critical LAN application:
4. Save the configuration.
380
G8264 Application Guide for ENOS 8.4
Note: PFC is enabled on priority 3 by default. If using the defaults, the manual
configuration commands shown in this step are not necessary.
RS G8264(config)# cee port 2 pfc priority 3 enable(Enable on FCoE priority)
RS G8264(config)# cee port 2 pfc priority 3 description "FCoE"
RS G8264(config)# cee port 3 pfc priority 3 enable(Enable on FCoE priority)
RS G8264(config)# cee port 3 pfc priority 3 description "FCoE"
RS G8264(config)# cee port 1 pfc priority 4 enable(Enable on LAN priority)
RS G8264(config)# cee port 1 pfc priority 4 description "Critical LAN"
RS G8264(config)# cee port 4 pfc priority 4 enable( Enable on LAN priority)
RS G8264(config)# cee port 4 pfc priority 4 description "Critical LAN"
(Optional description)
(Optional description)
(Optional description)
(Optional description)