RMON Group 1—Statistics
1. Enable RMON on a port.
2. View RMON statistics for the port.
© Copyright Lenovo 2016
The switch supports collection of Ethernet statistics as outlined in the RMON
statistics MIB, in reference to etherStatsTable. You can configure RMON statistics
on a per‐port basis.
RMON statistics are sampled every second, and new data overwrites any old data
on a given port.
Note: RMON port statistics must be enabled for the port before you can view
RMON statistics.
The following is an example of configuring RMON Group 1:
RS G8264(config)# interface port 1
RS G8264(configif)# rmon
RS G8264(configif)# show interface port 1 rmoncounters
RMON statistics for port 1:
etherStatsDropEvents: NA
etherStatsOctets: 7305626
etherStatsPkts: 48686
etherStatsBroadcastPkts: 4380
etherStatsMulticastPkts: 6612
etherStatsCRCAlignErrors: 22
etherStatsUndersizePkts: 0
etherStatsOversizePkts: 0
etherStatsFragments: 2
etherStatsJabbers: 0
etherStatsCollisions: 0
etherStatsPkts64Octets: 27445
etherStatsPkts65to127Octets: 12253
etherStatsPkts128to255Octets: 1046
etherStatsPkts256to511Octets: 619
etherStatsPkts512to1023Octets: 7283
etherStatsPkts1024to1518Octets: 38
Chapter 44: Remote Monitoring
689