4. Once the switches in the stack have rebooted, verify that all of them are using the
312
G8264 Application Guide for ENOS 8.4
same version of firmware. Use either the ISCLI or the BBI.
From the BBI, open Dashboard > Stacking > Stack Switches and view the Switch
Firmware Versions Information from the Attached Switches in Stack.
From the ISCLI, use the following command:
RS G8264(config)# show stack version
Switch Firmware Versions:
asnum csnum MAC S/W Version Serial #
A1 C2 fc:cf:62:9d:4f:00 image1 8.4.0.1 US7042001C
A2 C1 34:40:b5:3f:1d:00 image1 8.4.0.1 Y250VT215167
A3 C5 34:40:b5:40:bc:00 image1 8.4.0.1 Y250VT21S410
A4 C4 34:40:b5:41:76:00 image1 8.4.0.1 Y250VT21S409
A5 C3 34:40:b5:3f:0b:00 image1 8.4.0.1 Y250VT215168