Brother HL-L5000D Service Manual page 121

 Paper jams in the feeding path in the center of the machine
<User Check>
• Check that the paper is set in each paper tray correctly.
• Flip over the paper in each paper tray or rotate the paper 180°.
• Adjust the paper guide according to the paper size.
• Check that there is not too much paper set in each paper tray.
• Check that the thickness of the paper is 60 to 120 g/m
and 60 to 200 g/m
• Flip through the paper and reset it in each paper tray.
• Replace the drum unit.
Step
Foreign object inside the
1
machine
2 Eject actuator coming off
Connection failure of the eject
3
sensor harness
4 Fuser cover attachment failure
5 Damaged fuser gear
6 Eject sensor failure
Registration rear sensor failure
7
8 Paper feed motor failure
Damaged gears in the paper
9
feeding system
10 Fuser unit failure
11 Main PCB failure
2
for the MP tray.
Cause
2-95
2
for paper tray 1 to 5,
Remedy
Remove the foreign object.
Reattach the eject actuator.
Reconnect the eject sensor harness.
Reattach the fuser cover.
Replace the fuser gear.
Replace the eject sensor PCB ASSY.
Replace the registration front/rear sensor PCB
ASSY.
Replace the paper feed motor.
Replace the main frame L ASSY.
Replace the fuser unit.
Replace the main PCB ASSY.
Confidential