Brother HL-L5000D Service Manual page 213

Assembling Note:
• Fold the laser unit flat cable at the positions shown in the figure below.
87±1
Laser unit
Conductor
side
< Location of the laser serial number on the laser unit >
Note:
• Attach the laser serial label to the position (on the laser plate) shown in the figure below
after replacing the laser unit.
Laser plate
Mountain fold
Valley fold
218±1
45°
193±1
Fig. 3-55
Laser serial number label
Fig. 3-56
45°
Laser plate
3-68
Main
Conductor
PCB side
Laser unit
Confidential