Brother HL-L5000D Service Manual page 250

(5) Turn MP paper empty actuator 2 in the direction of the arrow 5a, and push the hook in
the direction of the arrow 5b to slide MP paper empty actuator 1 in the direction of the
arrow 5c to remove it from the MP feed frame in the direction of the arrow 5d.
(6) Turn MP paper empty actuator 2 in the direction of the arrow 5a, and remove it from the
MP feed frame in the direction of the arrow 6.
(7) Remove the taptite bind B M3x10 screw. Remove the MP paper empty sensor PCB
ASSY from the MP feed frame, and pull out the MP paper empty sensor harness from
the hole.
MP paper empty actuator 2
5a
6
Assembling Note:
• Insert the end of MP paper empty actuator 1 into the groove on the MP paper empty
actuator 2.
MP paper empty actuator 1
5c
5d
5b
Hook
Fig. 3-95
3-105
Taptite bind B M3x10
MP paper empty sensor
PCB ASSY
MP paper empty sensor harness
MP feed frame
Confidential