Brother HL-L5000D Service Manual page 60

Error message
First line
No Paper Fed T5 Reload paper in Tray
5, then press [Retry].
No Paper MP -
No Paper T1 -
No Paper T2 -
No Paper T3 -
No Paper T4 -
No Paper T5 -
No Toner Open the Front Cover,
then install Toner
Cartridge.
No Tray Please install the
Attachment Tower Tray Attachment
Brackets.
No Tray T1 -
Second line
When printing from the paper tray
5, the T5TT paper feed sensor
does not detect paper pass within
the specified time while the T5TT
paper empty sensor detects some
paper set.
When printing from the MP tray,
the MP paper empty sensor
detected that there was no paper
set in the MP tray.
When printing from paper tray 1,
the T1 paper empty sensor or the
T1 paper feed sensor detected
that there was no paper set in
paper tray 1.
When printing from paper tray 2,
the T2(LT or TT) paper empty
sensor detected that there was no
paper set in paper tray 2.
When printing from paper tray 3,
the T3(LT or TT) paper empty
sensor detected that there was no
paper set in paper tray 3.
When printing from paper tray 4,
the T4(LT or TT) paper empty
sensor detected that there was no
paper set in paper tray 4.
When printing from paper tray 5,
the T5TT paper empty sensor
detected that there was no paper
set in paper tray 5.
The toner amount detection
sensor detected that the toner
cartridge was not set.
When the TT was connected, TT
balance sensor L/R wasn't
connected properly.
When printing from paper tray 1 to
5, the T1 paper feed sensor
detected open paper tray 1 (before
registering printing data to
engine).
When printing from paper tray 1 to
5, the T1 paper feed sensor
detected open paper tray 1 (after
registering printing data to
engine).
2-34
Description
Error Refer
codes to:
7701 2-64
9301 2-78
9302 2-78
9303 2-78
9304 2-78
9305 2-78
9306 2-78
6101 2-52
1F00 2-48
8501 2-71
8505 2-72
Confidential