Brother HL-L5000D Service Manual page 49

First line
No Tray T1 Reinstall Tray
No Tray T2 Reinstall Tray 2
No Tray T3 Reinstall Tray 3
No Tray T4 Reinstall Tray 4
Out of Memory Press Cancel
Output Tray Full Remove the paper
from the Output Tray.
Remove the paper
from the Standard
Output Tray.
Scroll
When printing from paper tray 1 to
4, the T1 paper feed sensor
detected open paper tray 1 (before
registering printing data to
engine).
When printing from paper tray 1 to
4, the T1 paper feed sensor
detected open paper tray 1 (after
registering printing data to
engine).
When printing from paper tray 2 to
4, the T2LT paper feed sensor
detected open paper tray 2 (before
registering printing data to
engine).
When printing from paper tray 2 to
4, the T2LT paper feed sensor
detected open paper tray 2 (after
registering printing data to
engine).
When printing from paper tray 3 to
4, the T3LT paper feed sensor
detected open paper tray 3 (before
registering printing data to
engine).
When printing from paper tray 3 to
4, the T3LT paper feed sensor
detected open paper tray 3 (after
registering printing data to
engine).
When printing from paper tray 4,
the T4LT paper feed sensor
detected open paper tray 4 (before
registering printing data to
engine).
When printing from paper tray 4,
the T4LT paper feed sensor
detected open paper tray 4 (after
registering printing data to
engine).
There is insufficient memory to
expand PC print data.
MX 1bin, 2bin, 3bin, or 4bin stack
sensor or machine stack sensor
detected the ejected paper full
state at the start of printing.
Machine stack sensor detected
the eject paper full state at the
start of printing when the machine
output tray was selected as the
output tray.
2-23
Description
Error Refer
codes to:
8501 2-71
8505 2-72
8502 2-71
8506 2-72
8503 2-71
8507 2-72
8504 2-71
8508 2-72
C700 2-81
8701 2-72
8702 2-73
Confidential