Brother HL-L5000D Service Manual page 50

First line
Paper Low Tray 1 -
Paper Low Tray 2 -
Paper Low Tray 3 -
Print Data Full Print Data is full. Press
Cancel and delete the
previously stored data.
Print Unable 01 Turn the power off and
then back on again.
Print Unable 02 Turn the power off and
then back on again.
Print Unable 03 Turn the power off and
then back on again.
Print Unable 04 Turn the power off and
then back on again.
Print Unable 05 Turn the power off and
then back on again.
Print Unable 08 Turn the power off and
then back on again.
Print Unable 09 Turn the power off and
then back on again.
Print Unable 0A Turn the power off and
then back on again.
Scroll
Detected that the paper is running out
when the paper feed motor drive and
T1 paper empty sensor turned ON.
Detected that the paper is running out
when the paper feed motor drive and
T2LT paper empty sensor turned ON.
Detected that the paper is running out
when the paper feed motor drive and
T3LT paper empty sensor turned ON.
The memory size allotted for
Secure Print was exceeded when
saving Secure Print data.
An error occurred at the motor
drive circuit in the main PCB.
Main PCB detected an error in the
paper feed motor.
Main PCB detected an error in the
eject motor.
Main PCB detected an error at the
polygon motor in the laser unit.
Main PCB detected an error at the
polygon motor in the laser unit.
Detected the fuser unit
temperature error.
An error occurred in the internal
temperature sensor.
Detected irregular power supply
for more than 100 times.
Main PCB detected the main fan
failure.
2-24
Description
Error Refer
codes to:
--- 4.11.4
--- 4.11.4
--- 4.11.4
C800 2-83
0102 2-43
0201 2-43
0203 2-43
0300 2-44
0401 2-44
0501 2-45
0502 2-45
0503 2-45
0504 2-45
0505 2-45
0506 2-45
0508 2-45
050A 2-46
050B 2-46
050C 2-46
0800 2-46
0900 2-47
0A02 2-47
Confidential