Troubleshooting For Pcb Problems; Main Pcb Failure; Memory Full - Brother HL-L5000D Service Manual

4.10 Troubleshooting for PCB Problems

4.10.1 Main PCB failure

<User Check>
- Turn the power switch OFF and then ON again.
- Install the latest main firmware.
- Check the print limit ID.
- Check that the print data is not damaged.
Step
1 Main PCB failure

4.10.2 Memory full

<User Check>
- Print the accumulated data.
- Reduce the amount or resolution of the data.
Step
1 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-117
Remedy
Remedy
Confidential