Brother HL-L5000D Service Manual page 227

 Common to all models
(11) Remove the four taptite cup S M3x8 SR screws and four taptite bind B M4x12 screws.
Remove the main frame L ASSY, and pull out the erase lamp harness, paper empty
sensor harness (models with 520-sheet T1 and HL-5580D/5585D only), low-voltage
power supply harness, eject sensor harness, and HVPS flat cable from the hole of the
main frame L ASSY.
Eject sensor harness
Paper empty sensor harness
(Models with 520-sheet T1 and
HL-5580D/5585D only)
HVPS flat cable
Taptite bind B M4x12
Taptite cup S M3x8 SR
Taptite bind B M4x12
Fig. 3-71
3-82
Taptite cup S M3x8 SR
Main frame L ASSY
Low-voltage power
supply harness
Erase lamp harness
Main frame L ASSY
Confidential