Error message
First line
No HUB Support
No HUB Support.
No Paper
-
No Paper T1
No Paper T2
No Paper T3
No Paper T4
No Paper T5
No Paper Fed T1 Reload paper in Tray
1, then press [Retry].
No Paper Fed T2 Reload paper in Tray
2, then press [Retry].
No Paper Fed T3 Reload paper in Tray
3, then press [Retry].
No Paper Fed T4 Reload paper in Tray
4, then press [Retry].
Second line
A USB device with a built-in hub is
connected.
Detected that there was no paper
set in all trays when TrayAuto was
selected for printing.
Detected that there was no paper
set in the paper tray 1 when
printing from the paper tray 1.
Detected that there was no paper
set in the paper tray 2 when
printing from the paper tray 2.
Detected that there was no paper
set in the paper tray 3 when
printing from the paper tray 3.
Detected that there was no paper
set in the paper tray 4 when
printing from the paper tray 4.
Detected that there was no paper
set in the paper tray 5 when
printing from the paper tray 5.
When printing from the paper tray
1, the T1 paper feed sensor does
not detect paper pass within the
specified time while the T1 paper
empty sensor detects some paper
set.
When printing from the paper tray
2, the T2(LT or TT) paper feed
sensor does not detect paper pass
within the specified time while the
T2(LT or TT) paper empty sensor
detects some paper set.
When printing from the paper tray
3, the T3(LT or TT) paper feed
sensor does not detect paper pass
within the specified time while the
T3(LT or TT) paper empty sensor
detects some paper set.
When printing from the paper tray
4, the T4(LT or TT) paper feed
sensor does not detect paper pass
within the specified time while the
T4(LT or TT) paper empty sensor
detects some paper set.
2-33
Description
Error
Refer
codes
to:
---
4.11.3
9309
2-79
---
4.2.1
---
4.2.1
---
4.2.1
---
4.2.1
---
4.2.1
7301
2-57
7401
2-58
7501
2-60
7601
2-62
Confidential