Brother HL-L5000D Service Manual page 43

Error
Description
codes
8E01 ―
8E02 ―
8F01 ―
8F02 ―
8F03 ―
When printing from the MP tray, the
size of paper set in the MP tray does
9001
not match the size specified by the
driver.
When printing from the paper tray 1,
the size of paper set in the paper tray
9002
1 does not match the size specified by
the driver.
When printing from the paper tray 2,
the size of paper set in the paper tray
9003
2 does not match the size specified by
the driver.
When printing from the paper tray 3,
the size of paper set in the paper tray
9004
3 does not match the size specified by
the driver.
When printing from the paper tray 4,
the size of paper set in the paper tray
9005
4 does not match the size specified by
the driver.
When printing from the paper tray 5,
the size of paper set in the paper tray
9006
5 does not match the size specified by
the driver.
9102 ―
9103 ―
9104 ―
9105 ―
9200 ―
When printing from the MP tray, paper
9201 type setting in the machine does not
match the setting in the driver.
When printing from the paper tray 1,
paper type setting in the machine
9202
does not match the setting in the
driver.
When printing from the paper tray 2,
paper type setting in the machine
9203
does not match the setting in the
driver.
Refer Error
to: codes
When printing from the paper tray 3,
paper type setting in the machine
9204
does not match the setting in the
driver.
When printing from the paper tray 4,
paper type setting in the machine
9205
does not match the setting in the
driver.
When printing from the paper tray 5,
paper type setting in the machine
9206
does not match the setting in the
driver.
When printing from the MP tray, the
9301 MP paper empty sensor detected that
there was no paper set in the MP tray.
When printing from paper tray 1, the
T1 paper empty sensor or the T1
9302
paper feed sensor detected that there
was no paper set in paper tray 1.
When printing from paper tray 2, the
T2(LT or TT) paper empty sensor
2-76 9303
detected that there was no paper set
in paper tray 2.
When printing from paper tray 3, the
T3(LT or TT) paper empty sensor
2-76 9304
detected that there was no paper set
in paper tray 3.
When printing from paper tray 4, the
T4(LT or TT) paper empty sensor
2-76 9305
detected that there was no paper set
in paper tray 4.
When printing from paper tray 5, the
T5TT paper empty sensor detected
2-76 9306
that there was no paper set in paper
tray 5.
Detected that there was no paper set
2-76 9309 in all trays when TrayAuto was
selected for printing.
2-76
930A ―
Firmware version of the main PCB is
9400
older than that of the TT, MX and LT.
9501 ―
9502 ―
9503 ―
9504 ―
2-77 9505 ―
2-77 9601 ―
2-77 9608 ―
2-17
Description
Confidential
Refer
to:
2-77
2-77
2-77
2-78
2-78
2-78
2-78
2-78
2-78
2-79
2-79