Error code 7100
The eject sensor remains ON (paper pass detected) even after the registration rear sensor
detected the end of paper pass.
<User Check>
• Remove the jammed paper.
• Check if the back cover is open during duplex printing.
Step
Foreign object in the rear of the
1
machine
Eject actuator caught in some
2
sections of the machine
3
Fuser cover attachment failure
4
Eject sensor failure
High-voltage power supply PCB
5
failure
6
Fuser cover failure
Damaged eject roller 1 drive
7
gears
8
Main PCB failure
Error code 7200
When feeding from the MP tray, the registration rear sensor does not detect paper pass
within the specified time after the registration front sensor detected paper pass.
<User Check>
• Remove the jammed paper.
• Add the paper properly using the MP tray paper guide.
• Close the front cover correctly.
Step
Foreign object in the front of the
1
machine
Registration rear actuator
2
coming off or caught in some
sections of the machine
Connection failure of the
3
registration front/rear sensor
harness
Connection failure of the
4
registration clutch harness
MP feed frame attachment
5
failure
Registration rear sensor failure
6
7
Registration clutch failure
High-voltage power supply PCB
8
failure
Damaged gears in the paper
9
feeding system
10
Main PCB failure
Cause
Remove the foreign object.
Reattach the eject actuator.
Reattach the fuser cover.
Replace the eject sensor PCB ASSY.
Replace the high-voltage power supply PCB
ASSY.
Replace the fuser cover.
Replace the main frame L ASSY.
Replace the main PCB ASSY.
Cause
Remove the foreign object.
Reattach the registration rear actuator.
Reconnect the registration front/rear sensor
harness.
Reconnect the registration clutch harness.
Reattach the MP feed frame.
Replace the registration front/rear sensor PCB
ASSY.
Replace the registration clutch.
Replace the high-voltage power supply PCB
ASSY.
Replace the main frame L ASSY.
Replace the main PCB ASSY.
2-56
Remedy
Remedy
Confidential