Brother HL-L5000D Service Manual page 52

First line
Replace Drum -
Replace Fuser -
Replace Laser -
Replace PF Kit1 -
Replace PF Kit2 -
Replace PF Kit3 -
Replace PF Kit4 -
Replace PF -
KitMP
Replace Toner Open the Front Cover,
replace Toner
Cartridge.
Self-Diagnostic Turn the power off,
then on again. Leave
the machine for 15
min.
Will Automatically
Restart within 15
minutes.
Scroll
The number of rotations of the
drum unit has reached the upper
limit. (Printing does not stop.)
The number of printable pages of
the fuser unit has reached the
upper limit.
The number of printable pages of
the laser unit has reached the
upper limit.
Printable pages set for PF kit 1
have reached the upper limit.
Printable pages set for PF kit 2
have reached the upper limit.
Printable pages set for PF kit 3
have reached the upper limit.
Printable pages set for PF kit 4
have reached the upper limit.
Printable pages set for PF kit MP
have reached the upper limit.
Dot counter or develop roller
counter of the toner has reached
the upper limit.
An error occurred in the fuser unit
when the power switch was turned
ON or sleep mode was released.
Rechecking the error after the
power switch was turned OFF and
then ON again because an error
was detected in the fuser unit.
(This message is displayed for
approximately 15 minutes when
the machine is restarted after error
code 6901 has occurred.)
2-26
Description
Error Refer
codes to:
4200 2-49
4500 2-49
4600 2-50
5002 2-51
5003 2-51
5004 2-51
5005 2-51
5001 2-51
4C01 2-50
6901 2-54
6902 2-54
Confidential