Mx Connector Assy (Touch Panel Models Only) - Brother HL-L5000D Service Manual

9.29 MX connector ASSY (Touch panel models only)

(1) Remove the three taptite bind B M4x12 screws, and remove the MX holder plate.
(2) Release the two hooks A, and remove the MX connector ASSY from the MX holder
plate.
(3) Release the hook B to disconnect the MX connector harness from the MX connector
ASSY.
Harness routing: Refer to
Taptite bind B M4x12
Fig. 3-81
"1. Left side of the machine (Touch panel
3-92
MX connector harness
MX holder plate
Hook A
Hook A
MX connector ASSY
models)".
Hook B
Confidential