Brother HL-L5000D Service Manual page 316

(4) Loosen the clamp, and release the T4TT relay harness and the T5TT relay harness from
the securing fixtures.
(5) Remove the four taptite cup S M3x8 SR screws to remove the FG plate L.
(6) Remove the four taptite bind B M4x12 screws to remove the calking gear plate ASSY.
(7) Remove the three taptite cup S M3x8 SR screws and the two taptite bind B M4x10
screws. Lift the T4TT unit slightly, and pull the T5TT relay harness from the T4TT unit
hole to remove the T4TT unit in the direction of the arrow.
T4TT relay harness
T5TT relay harness
Taptite cup S
M3x8 SR
Taptite cup S M3x8 SR
Harness routing: Refer to
Fig. 3-168
"13. Left side of the TT".
3-171
Clamp
TT relay PCB ASSY
T4TT unit
Hole
T5TT relay harness
FG plate L
Taptite cup S
M3x8 SR
Taptite bind B M4x10
Calking gear
plate ASSY
Taptite bind B M4x12
Confidential