Control Panel - Brother HL-L5000D Service Manual

9.10.4 Control panel

(1) Remove the taptite cup B M3x10 screw, and remove the FG harness A from the top
cover printed ASSY. Release the FG harness A from the securing fixtures.
(2) Remove the taptite cup B M3x10 screw, and disconnect the FG harness B.
(3) Release the LCD flat cable from the securing fixtures, and disconnect it from the flat
core.
FG harness A
Top cover printed ASSY
Flat core
Harness routing: Refer to
Assembling Note:
• Fold the LCD flat cable at the positions shown in the figure below.
72±2
52±2
Panel
PCB
side
Conductor
Taptite cup B M3x10
FG harness B
LCD flat cable
Fig. 3-39
"4. Bottom side of the top cover ASSY (Touch panel
Mountain fold
Valley fold
45°
Fig. 3-40
45° 45°
128±2
3-54
models)".
58±2
50±2
43±2
35±2
LCD
PCB
side
83±2
Conductor
108±2
Confidential