Table of Contents
Advertisement
FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Tab
Issue 03 (2021-04-20)
Parameter
Balance of water and
electricity
consumption
Wet mode startup
temperature
Dehumidifying
function
DO_1 action
DO_2 action
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 Power-On Commissioning
Description
This parameter can be set to Power
saving mode, Normal water saving
mode, Extreme water saving mode,
or Customized mode. Set this
parameter based on the site
requirements.
NOTE
You are advised to retain the default value.
This parameter is displayed when
Balance of water and electricity
consumption is set to Customized
mode.
Set this parameter as required.
● Enable: The device starts
dehumidifying when the ambient
humidity is higher than the
humidity setpoint.
● Disable: The dehumidifying function
is disabled.
This parameter can be set to On or
Off, and is used together with DO_1.
For details, see DO_1 description.
This parameter can be set to On or
Off, and is used together with DO_2.
For details, see DO_2 description.
107
Advertisement
Table of Contents
