FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
4.5.2 Cable Routes
Figure 4-16 Cable routes
(1) Power cable
(4) Electric heater controller
cable
4.5.3 (Optional) Installing Signal Cables
Prerequisites
Signal cables must be routed through protective tubes for protection.
The unit can be connected to a smoke sensor, remote startup/shutdown signal,
common alarm signal, and water sensor. The following describes how to connect a
water sensor.
Context
Figure 4-17 Signal cable terminal (using X501 as an example)
Issue 03 (2021-04-20)
NO TE
The preceding figure shows the arrangement of signal terminals X502, X504, and X505.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation (Building Scenario)
(2) Exhaust air damper cable
(5) Signal cable
(3) Supply air damper cable
51