Replacing A Water Pump - Huawei FusionCol8000-E24 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Step 5 Install the new liquid level sensor and tighten it to a torque of 5 N·m. Install the
fastener and connect the interconnection terminal of the liquid level sensor.
Step 6 Power on the unit and tap Start on the home screen. Ensure that the unit is
running normally without any alarms.
Step 7 Install the maintenance door and water baffle plate for the fan.
----End

12.20 Replacing a Water Pump

Prerequisites
●
●
●
Before replacing the water pump, drain water from the water tank completely.
Procedure
Step 1 On the home screen of the display module, tap Shutdown and turn off the unit
switch in the PDF.
Issue 03 (2021-04-20)
Figure 12-44 Removing a liquid level sensor
(1) Fastener
A water pump needs to be replaced.
A spare water pump of the same model is available and functional.
Tools: flat-head screwdriver, Phillips screwdriver, socket wrench
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
12 Component Replacement
(2) Liquid level sensor
194