Table of Contents
Advertisement
FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
●
Drilling Holes
When drilling holes into a wall or floor, observe the following safety precautions:
Do not drill holes into the equipment. Doing so may affect the electromagnetic
shielding of the equipment and damage components or cables inside. Metal
shavings from drilling may short-circuit boards inside the equipment.
●
●
●
Moving Heavy Objects
When pulling the equipment out of a cabinet, be aware of unstable or heavy
objects on the cabinet to prevent injury.
●
Issue 03 (2021-04-20)
When climbing a ladder, take the following precautions to reduce risks and
ensure safety:
–
Keep your body steady.
–
Do not climb higher than the fourth rung of the ladder from the top.
–
Ensure that your body's center of gravity does not shift outside the legs
of the ladder.
NO TICE
Obtain consent from the customer and contractor before drilling holes.
Wear goggles and protective gloves when drilling holes.
When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings that have accumulated inside or outside the equipment.
D ANGER
Be cautious to avoid injury when moving heavy objects.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
9
Advertisement
Table of Contents
