Chapter 5 Installation
Step 1. Remove the connector panel blank
Step 2. Insert the UPS Network Management Card into the slot. Secure the panel by tightening the
two screws.
Environmental Monitoring Probe (EMP)
Figure 22 below displays the Environmental Monitoring Probe (EMP). No UPS ship standard
with the probe, and it needs to be ordered separately.
The EMPs purpose is to report on local environmental temperature and humidity at its installed
location. For example, if the EMP device is installed at the top of a rack, it will report on the
temperature and humidity values at that location.
The optional EMP can be ordered as follows:
Part Number Feature Code Description
46M4113
6146
68
, which is secured by two screws.
Environmental Monitoring Probe
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG