Toro Multi Pro 5800-D Installation Instructions Manual page 26

Figure 53
1. Agitation throttle valve
2. Agitation-valve bracket
3. Front of the machine
7. Secure the agitation-valve bracket to the sprayer-pump
bracket (Figure 53) with 2 flange-head bolts (1/4 x 3/4
inch).
4. Flange-head bolt—thread
forming (1/4 x 3/4 inch)
5. Sprayer-pump bracket
Installing the Agitation-Nozzle
Assemble and Hoses
1. Assemble the straight barbed fitting of the agitation
supply hose (1 x 33-1/2 inches) onto the quick coupling
of the agitation throttle valve with the retainer that is
supplied with the hose
1. Quick-connect fitting
(agitation control valve)
2. Retainer
2. Route the hose to the agitation throttle valve
55).
26
(Figure 54).
Figure 54
3. Straight barbed fitting
(agitation supply hose)
4. Quick-connect fitting
(agitation throttle valve)
(Figure