Toro Multi Pro 5800-D Installation Instructions Manual page 4

Procedure
Eductor shutoff valve
Shutoff-valve bracket
Flange locknuts (1/4 inch)
Gasket—25 x 35 mm (1 x 1-3/8 inches)
Flange clamp—40 to 64 mm (1-9/16 to
2-1/2 inches)
Agitation bypass hose—25 x 337 mm
(1 x 13-1/4 inches)
12
Gasket—25 x 35 mm (1 x 1-3/8 inches)
Flange clamp—40 to 64 mm (1-9/16 to
2-1/2 inches)
Pressure-relief hose—2.5 x 29.8 cm (1
x 11-3/4 inches)
Sprayer supply hose—2.5 x 48.6 cm (1
x 19-1/8 inches)
Eductor supply hose—2.5 x 156.5 cm
(1 x 61-5/8 inches)
Bypass and drain-hose assembly
Support clamp
13
Flange-head bolt (5/16 x 3/4 inch)
Washer (5/16 inch)
Supply hose—left boom section—2 x
205 cm (3/4 x 80-13/16 inches)
Supply hose—center boom section— 2
14
x 58 cm (3/4 x 22-13/16 inches)
Supply hose—right boom section—2 x
170 cm (3/4 x 66-13/16 inches)
Flange shutoff valve
Bracket (nylon)
90° elbow (with pressure port)
Gasket—25 x 35 mm (1 x 1-3/8 inches)
Flange clamp—40 to 64 mm (1-9/16 to
2-1/2 inches)
Washer (5/16 x 13/16 inch)
15
Bolt (6 x 16 mm)
Hose clamp
Quick-connect fitting (socket)
Straight barbed fitting (1/2 inch)
Hose—1.3 x 762 cm (1/2 x 300 inches)
Hose—1.3 x 180 cm (1/2 x 71 inches)
Cable ties
Rear wire harness
16
Cable tie
17
No parts required
Jumper harness (optional spray gun kit
18
or electric hose-reel kit)
19
No parts required
20
No parts required
Description
4
Qty.
1
1
1
1
1
1
Install the shutoff valve and hoses for
1
the chemical premix kit.
1
1
1
1
1
1
Install the section bypass hose and
drain-hose assembly.
1
1
1
1 Install the sprayer nozzle hoses.
1
1
1
1
1
1
Install the shutoff valve and hose for
4
the optional spray gun kit or electric
4
hose-reel kit.
2
1
1
1
1
3
1
Assemble the rear wiring harness to the
machine.
3
–
Connect the rear wire harness.
Connect the rear wire harness to the
1
Optional Attachments
Connect the pressure-sense tube for
–
the dash gauge.
Complete the installation of the valve
–
conversion kit.
Use