Toro Multi Pro 5800-D Installation Instructions Manual page 32

Figure 66
1. T-fitting (sprayer pump)
2. T-fitting (pressure-relief
valve)
4. Remove the T-fitting with the pressure-relief valve from
the T-fitting in the top of the sprayer pump
Figure 67
1. T-fitting (pressure-relief
valve)
2. Retainer
5. Assemble the T-fitting with the pressure-relief valve
to the T-fitting in the top of the sprayer pump with
the retainer that you removed in step
Figure 67.
3. Retainer
(Figure
3. T-fitting (sprayer pump)
3 as shown in
Installing the Section Bypass Hose
Machines with the Optional Eductor Kit
1. Rotate the upper T-fitting approximately 35°
counterclockwise
66).
1. Upper T-fitting
2. Assemble the 90° barbed fitting of the agitation bypass
hose to the upper T-fitting
that you removed in step
Bypass and Sprayer Supply Hoses (page
32
(Figure 68).
Figure 68
(Figure 69) with the retainer
2 of Removing the Agitation
17).