Removing The Flow Meter - Toro Multi Pro 5800-D Installation Instructions Manual

Removing the Flow Meter

Machines with the Optional Pro Control Kit
1. Remove the 2 flange clamps that secure the flow meter
to the flanges of the agitation control valve and the left
boom-segment valve
Figure 38
1. Flange (agitation control
valve)
2. Flange (left-boom-section
valve)
3. Bolt and nut (boom-section
valve)
2. Remove the 2 gaskets and the flow meter from the
machine (Figure 38).
Note: If needed, loosen the 4 flange-head bolts and
the 4 flange locknuts that secure the 3 boom-section
valves to the valve support
(Figure 38).
4. Flow meter
5. Gasket
6. Flange clamp
(Figure 38).
6
Disassembling the Supply
Hose
Machines with the Optional Spray Gun
Kit or Electric Hose-Reel Kit or Eductor
Kit
No Parts Required
Removing the Spray Gun from the
Supply Hose
Machines with the Spray Gun Kit
1. Remove the hose clamp that secures the supply hose to
the hose barb of the spray gun
1. Supply hose
2. Hose clamp
2. Remove the hose from the hose barb
Note: Retain the 2 hose clamps and spray gun for
installation in Installing the Supply Hose—Machines
with the Optional Spray Gun Kit (page
will remove the supply hose with the valve mount in
Removing the Valve Support (page
18
(Figure 39).
Figure 39
3. Hose barb (spray gun)
(Figure
41). You
20).
39).