Toro Multi Pro 5800-D Installation Instructions Manual page 52

Figure 124
1. Locking collar (tube
coupler)
2. Insert the sense tube into the locking collar until the
tube is fully seated (Figure
2. Pressure-sense tube
(dash-pressure gauge)
124).
Connecting the Pressure
Sense-Tube—Optional Spray Gun
Kit or Optional Electric Hose-Reel Kit
1. Align the end of the pressure-sense tube (plastic) for
the pressure gauge in the dash with the locking collar
for the tube coupler at the T-fitting
Optional Spray Gun Kit
1. Pressure-sense tube
(spray gun or hose-reel
gauge)
2. Pressure-sense tube
(dash gauge)
2. Insert the sense tube into the locking collar until the
tube is fully seated
3. Align the end of the pressure-sense tube (plastic) for
the pressure gauge in the control box for the spray gun
kit or electric hose-reel kit with the locking collar for
the tube coupler at the T-fitting
4. Insert the sense tube into the locking collar until the
tube is fully seated
52
(Figure 125).
Figure 125
3. Tube coupler (T-fitting)
(Figure 125).
(Figure 125).
(Figure 125).