Cleaning The Manifold Valve - Toro Multi Pro 5800-D Installation Instructions Manual

Figure 138
1. Bypass fitting

Cleaning the Manifold Valve

1. Position the valve stem so that it is in the closed
position (Figure 139).
Figure 139
1. Valve open
2. Remove the 2 end-cap-fitting assemblies from each end
of the manifold body
2. Section valve manifold
2. Valve closed
(Figure 140 and Figure 141).
Agitation Valve Manifold
1. Stem retainer
2. Valve stem
3. Stem port
4. Stem retainer
5. End-cap fitting
6. End-cap-seal O-ring
(0.796 inch / 0.139 inch)
59
Figure 140
7. Back seating O-ring (0.676
inch / 0.07 inch)
8. Valve-seat ring
9. Manifold body
10. Ball valve
11. Quick connect