Toro Multi Pro 5800-D Installation Instructions Manual page 41

3. Align the 4 washers (5/16 x 13/16 inch) between the
nylon bracket of the flange shutoff valve and the valve
mount (Figure 91).
Figure 91
1. Nylon bracket
2. Washers (5/16 x 13/16
inch)
4. Assemble the nylon bracket and washers to the valve
mount with 4 bolts (6 x 16 mm) as shown in
Figure 92
1. Nylon bracket
2. Washer (5/16 x 13/16 inch)
3. Valve mount
Figure
3. Bolt (6 x 16 mm)
Installing the Supply Hose—Machines
with the Optional Spray Gun Kit
1. Assemble the quick-connect fitting (socket) to the
straight barbed fitting (1/2 inch) to the hose—1.3 x
762 cm (1/2 x 300 inches) with the clamp that you
removed in Removing the Spray Gun from the Supply
Hose (page 18)
92.
1. Quick-connect fitting
(socket)
2. Straight barbed fitting (1/2
inch)
2. Assemble the quick-connect fitting (socket) of the hose
to the quick-connect fitting of the flange shutoff valve
(Figure 94).
41
as shown in Figure 93.
Figure 93
3. Hose clamp
4. Hose—1.3 x 762 cm (1/2 x
300 inches)