Toro Multi Pro 5800-D Installation Instructions Manual page 27

Figure 55
1. Agitation throttle valve
2. Agitation supply hose (1 x
33-1/2 inches)
3. Assemble the straight barbed fitting of the agitation
supply hose onto the quick coupling of the agitation
throttle valve with the retainer that is supplied with the
hose (Figure 54).
4. Insert the 4 agitation nozzles of the agitation-nozzle
assembly into the bulkhead fittings of the sprayer tank
(Figure 56).
Figure 56
1. Bulkhead fitting
2. Retainer
3. Agitation control valve
3. Agitation nozzle
(agitation-nozzle
assembly)
5. Secure the agitation nozzles with the 4 retainers that
you removed in step
Nozzles and Hoses (page
6. Assemble the straight barbed fitting of the
agitation-nozzle assembly onto the quick coupling of
the agitation throttle valve with the retainer that is
supplied with the agitation-hose assembly
1. Straight barbed fitting
(agitation-nozzle
assembly)
2. Quick-connect fitting
(agitation throttle valve)
27
3 of Removing the Agitation
15).
(Figure
Figure 57
3. Retainer
57).