Port Summary Statistics - D-Link DWS-4026 User Manual

Dws-4000 series unified wired & wireless access system
Table of Contents

Advertisement

Software User Manual
12/10/09
Field
Total Transmit Packets
Discarded
Total Output Packets Drops
Single Collision Frames
Multiple Collision Frames
Excessive Collision Frames
Late Collision Frames
Port Membership Discards
Lost/No Carrier Frames
Protocol Statistics
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
MSTP BPDUs Received
MSTP BPDUs Transmitted
802.3x Pause Frames
Transmitted
GVRP PDUs Received
GVRP PDUs Transmitted
GVRP Failed Registrations
GMRP PDUs Received
GMRP PDUs Transmitted
GMRP Failed Registrations
Time Since Counters Last
Cleared
Click Clear Counters to clear all the counters. This resets all statistics for this port to the default values.
Click Clear All Counters to clear all the counters for all ports on the switch. The button resets all statistics for all ports
to default values.
Click Refresh to refresh the data on the screen and display the most current statistics.
P
S
S
ORT
UMMARY
TATISTICS
The Port Summary Statistics page shows a summary of per-port traffic statistics on the switch.
Document
34CSFP6XXUWS-SWUM100-D7
Table 60: Port Fields (Cont.)
Description
The sum of single collision frames discarded, multiple collision frames discarded, and
excessive frames discarded.
The total number of Aged packets.
A count of the number of successfully transmitted frames on a particular interface for
which transmission is inhibited by exactly one collision.
A count of the number of successfully transmitted frames on a particular interface for
which transmission is inhibited by more than one collision.
A count of frames for which transmission on a particular interface fails due to excessive
collisions.
Total number of collisions that occur after 512 bit collision window has passed.
The number of frames discarded on egress for this port due to egress filtering being
enabled.
Loss of the carrier detection occurs when the carrier signal of the hardware is
undetectable. It could be because the carrier signal was not present or was present
but could not be detected. Each such event causes this counter to increase.
Number of STP BPDUs received at the selected port.
Number of STP BPDUs transmitted from the selected port.
Number of RSTP BPDUs received at the selected port.
Number of RSTP BPDUs transmitted from the selected port.
Number of MSTP BPDUs received at the selected port.
Number of MSTP BPDUs transmitted from the selected port.
A count of MAC Control frames transmitted on this interface with an opcode indicating
the PAUSE operation. This counter does not increment when the interface is operating
in half-duplex mode.
The count of GVRP PDUs received in the GARP layer.
The count of GVRP PDUs transmitted from the GARP layer.
The number of times attempted GVRP registrations could not be completed.
The count of GMRP PDUs received from the GARP layer.
The count of GMRP PDUs transmitted from the GARP layer.
The number of times attempted GMRP registrations could not be completed.
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port
were last cleared.
D-Link Unified Access System
Viewing System Statistics
Page 137

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600apDws-4000 series

Table of Contents