Protocol-Based Vlan Summary; Figure 119: Protocol-Based Vlan Summary; Table 102: Protocol Group Fields; Table 103: Protocol-Based Vlan Summary Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Field Description
Group Use the drop-down menu to create or modify a protocol group. You can create up to 128 groups.
Group Name When creating a group, enter a name to associate with protocol group ID. You can modify the name
of an existing group. You can enter up to 16 characters.
Group ID Shows the number that identifies the group you create. Group IDs are automatically assigned when
you create a group.
Protocols Select one or more protocols to associate with this group. CTRL + click to select multiple protocols.
• IP: IP is a network layer protocol that provides a connectionless service for the delivery of data.
• ARP: Address Resolution Protocol (ARP) is a low-level protocol that dynamically maps network
layer addresses to physical medium access control (MAC) addresses
• IPX: The Internetwork Packet Exchange (IPX) is a connectionless datagram Network-layer protocol
that forwards data over a network.
VLAN ID Specifies the VLAN ID associated with this group. The range is 1-3965.
Slot/Port Selects the interface(s) to add or remove from this group. CTRL + click to select multiple ports.
• To create or modify a protocol-based VLAN group, edit the fields, and then click Submit.
• To delete an existing protocol-based VLAN group, select the group from the Group ID field, and then click Delete
Group.
P -B
ROTOCOL ASED
Use the Protocol-based VLAN Summary page to view information about protocol-based VLAN groups configured on the
system.
To access the Protocol-based VLAN Summary page, click LAN > Monitoring > VLAN Summary > Protocol-based VLAN
Port Summary in the navigation tree.
Field
Group Name
Group ID
Document 34CSFP6XXUWS-SWUM100-D7

Table 102: Protocol Group Fields

VLAN S
UMMARY

Figure 119: Protocol-based VLAN Summary

Table 103: Protocol-based VLAN Summary Fields

Description
Shows the user-defined name associated with protocol group.
Shows the number that identifies the group you create. Group IDs are automatically
assigned when you create a group.
D-Link Unified Access System
Managing Protocol-Based VLANs Page 195