Viewing Client Details; Figure 266: Client Summary; Table 236: Client Summary - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
If the switch supports clustering and there are peer switches in the cluster, some of the clients displayed on the page might
be connected to the network through other switches. For more information about the client, and to view information about
which switch handled the authentication for the client, click the MAC address of the client.
To view information about the wireless clients connected to the Unified Switch through the captive portal, click LAN >
Security > Captive Portal > Client Connection Status.
The following table describes the fields on the Client Summary page.
Field
MAC Address
IP Address
User
Protocol
Verification
To force the captive portal to disconnect an authenticated client, select the check box next to the client MAC address and
click Delete. To disconnect all clients from all captive portals, click Delete All.

Viewing Client Details

The Client Detail page shows detailed information about each client connected to the network through a captive portal.
Document 34CSFP6XXUWS-SWUM100-D7

Figure 266: Client Summary

Table 236: Client Summary

Description
Identifies the MAC address of the wireless client (if applicable). If the MAC address is
marked with an asterisk (*), the authenticated client is authenticated by a peer switch. In
order words, the cluster controller was not the authenticator.
Identifies the IP address of the wireless client (if applicable).
Displays the user name (or Guest ID) of the connected client.
Shows the current connection protocol, which is either HTTP or HTTPS.
Shows the current account type, which is Guest, Local, or RADIUS.
D-Link Unified Access System
Captive Portal Configuration Page 379