Downloading A File To The Switch - D-Link DWS-4026 User Manual

D-Link Unified Access System

Downloading a File to the Switch

Before you download a switch to the file, the following conditions must be true:
• The file to download from the TFTP server is on the server in the appropriate directory.
• The file is in the correct format.
• The switch has a path to the TFTP server.
Use the following procedures to download a file from a TFTP server to the switch.
1 From the File Type field, select the type of file to download.
2 If you are downloading a D-Link image (Code), select the image on the switch to overwrite. If you are downloading
another type of file, the Image Name field is not available.
It is recommended that you not overwrite the active image.
3 Verify the IP address of the TFTP server and ensure that the software image or other file to be downloaded is available
on the TFTP server.
4 Complete the TFTP Server IP Address and TFTP File Name (full path without TFTP server IP address) fields.
5 Click the Start File Transfer check box, and then click Submit.
After you click Submit, the screen refreshes and a "File transfer operation started" message appears. After the software
is downloaded to the device, a message appears indicating that the file transfer operation completed successfully.
To activate a software image that you download to the switch, see
Page 144 Using System Utilities
Software User Manual
"Multiple Image Service" on page
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09
146.