Ap Management; Reset; Rf Management; Figure 303: Access Point Reset - D-Link DWS-4026 User Manual

Dws-4000 series unified wired & wireless access system
Table of Contents

Advertisement

Software User Manual
12/10/09
AP M
ANAGEMENT
The AP Management folder contains links to the following pages that help you manage and maintain the APs on your D-Link
Unified Switch network:

Reset

RF Management

Access Point Software Download
Managed AP Advanced Settings
R
ESET
You can manually reset one or all APs from the Unified Switch. When you issue the command to reset an AP, the AP closes
the SSL connection to the switch before resetting the hardware.
To reset one or more APs, click WLAN > Administration > AP Management > Reset.
Select the APs you want to reset and click Reset, or click Reset All to reset all of the APs managed by the switch.
The APs might take several minutes to reset and re-establish communication with the switch. While the AP is resetting, the
status changes to failed, and then back to managed once the AP is back online.
RF M
ANAGEMENT
The radio frequency (RF) broadcast channel defines the portion of the radio spectrum that the radio on the access point uses
for transmitting and receiving. The range of available channels for an access point is determined by the IEEE 802.11 mode
(also referred to as band) of the access point.
Each AP is a dual-band system capable of operating in multiple modes. IEEE 802.11b and 802.11g modes (802.11 b/g)
operate in the 2.4-GHz RF frequency and support use of channels 1 through 11. IEEE 802.11a mode operates in the 5 GHz
frequency and supports a larger set of non-consecutive channels (36,40,44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165).
IEEE 802.11n mode can operate in either the 2.4 GHz or 5 GHz frequency.
The available channels depends on the country in which the APs operate. The channels described in this
section are valid for the United States.
Interference can occur when multiple access points within range of each other are broadcasting on the same or overlapping
channels. The impact of this interference on network performance can intensify during busy times when a large amount of
Document
34CSFP6XXUWS-SWUM100-D7

Figure 303: Access Point Reset

D-Link Unified Access System

AP Management

Page 441

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600apDws-4000 series

Table of Contents