Lldp-Med Interface Configuration; Figure 188: Lldp-Med Interface Configure; Table 169: Lldp-Med Interface Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09

LLDP-MED Interface Configuration

Use this page to enable LLDP-MED mode on an interface and configure its properties. To display this page, click LAN > L2
Features > LLDP > LLDP-MED > Interface Configuration in the navigation tree.
Field
Interface
LLDP-MED Mode
Config Notification Mode
Transmit TLVs
• Click Submit to send the updated configuration to the switch. These changes take effect immediately but will not be
retained across a power cycle unless a save is performed.
Document 34CSFP6XXUWS-SWUM100-D7

Figure 188: LLDP-MED Interface Configure

Table 169: LLDP-MED Interface Configuration Fields

Description
Selects the port that you want to configure LLDP-MED - 802.1AB on. You can select
All to configure all interfaces on the DUT with the same properties. To view the
summary of all interfaces, refer to the
The Interface Configuration page will not be able to display the summary of 'All'
interfaces. The summary of individual interfaces is visible from the Interface
Configuration page. The Interface Configuration page for the 'All' option will always
display the LLDP-MED mode and notification mode as 'disabled' and check boxes for
'Transmit TLVs' will always be unchecked.
Enables or disables LLDP-MED mode for the selected interface. By enabling MED,
you will be effectively enabling the transmit and receive function of LLDP.
Enables or disables LLDP-MED topology change notification mode for the selected
interface.
Specifies which optional type length values (TLVs) in the LLDP-MED will be
transmitted in the LLDP PDUs frames for the selected interface:
• MED Capabilities: Transmits the capabilities TLV in LLDP frames.
• Network Policy: Transmits the network policy TLV in LLDP frames.
• Location Identification: Transmits the location TLV in LLDP frames.
• Extended Power via MDI - PSE: Transmits the extended PSE TLV in LLDP frames.
• Extended Power via MDI - PD: Transmits the extended PD TLV in LLDP frames.
• Inventory: Transmits the inventory TLV in LLDP frames.
D-Link Unified Access System
"LLDP-MED Interface Summary" on page
Managing LLDP
274.
Page 273