Software User Manual
12/10/09
P
T
ING
EST
Use the Ping page to tell the switch to send a Ping request to a specified IP address. You can use this feature to check
whether the switch can communicate with a particular network host.
To access the Ping page, click LAN > Administration > Ping Test in the navigation menu.
Field
Hostname/IP Address
Count
Interval
Size
Ping
•
Click Submit to send the ping. If successful, the results display as shown in
Document
34CSFP6XXUWS-SWUM100-D7
Figure 42: Ping
Table 32: Ping Fields
Description
Enter the IP address or the host name of the station you want the switch to ping. The
initial value is blank. This information is not retained across a power cycle.
Specify the number of pings to send.
Specify the number of seconds between pings sent.
Specify the size of the ping packet to send.
Displays the results of the ping.
D-Link Unified Access System
Figure
82.
Ping Test
Page 95